Posts tagged replace

most of us think that replacing a toilet is something best left to a professional installer. This is partially true, if you do not have time or know-how, it’s probably best to hire a professional installer do the work for you. But if you are ready to learn, a toilet, a little time on your hands and ready to replace efforts, the replacement of existing toilet with a new art is something you can do yourself. In fact, you can install a new toilet with a few simple steps.

What tools and materials you need?

Before starting work on the process of destruction and the installation, you should take your tools and equipment loans.

New toilets are available in various sizes and styles you can choose which your request. The critical dimension in the choice of your new toilet is the distance between the wall behind the toilet in the rearmost bolt, the toilet bowl. This measurement is called the toilet? S gross. You must ensure that the new toilet has the rough to the extent and the existing toilet, you are deleting. Most toilets are designed with a 12 inch rough-in, but it is very important to check. If you have that right, should the rest of the work go smoothly

The new toilet you should with all the parts you need, come anyway;. You need a toilet seal and 5 / 16 “to block the toilet. You may need to complete a classroom caulking the joint between the toilet bowl and floor. You also need a public key setting to solve the tubes and screws.

Remove the old toilet

Ok, so time to remove the old toilet. The first step is the water supply to the toilet and flush the tank empty intersection. Make sure you hold the UP or a trip lever to ensure that all water flows. Remove excess water with a bucket and sponge to make sure they are both empty.

At the bottom of the tank on the left to find a nut that secures the water supply valve, remove it with a spanner. You must also remember the two screws to remove the toilet upstairs. When Kana? T they screw you may need to cut with a hacksaw.

is done, it should be possible from side to side of the toilet to break the seal coat and only remove the toilet and lift. Otherwise, ensure that the tank is not secured to the inner wall. If it you need to get the plants to the tank to be removed first before you delete or remove the shell.

When the toilet is removed, you will notice a circular flange on the floor. Here’s your new toilet will be installed. It is important to clear the existing flange and check to confirm that it does not damage be done correctly for the connection of new concepts. Remove the old sealant, putty and wax both the floor and the floor flange. Clean the floor around the toilet base as the base of the new toilet can be different and not the notes, so you might even than painting on the wall behind the toilet, so even if you have access easy.

Installation Bowl

To install the new toilet bowl, almost the opposite of what you have the old toilet removed. First, the toilet bowl sitting in position to check the flange and who is firmly seated on the floor to rock without. If it is not stable, you may have to the bottom of the toilet did not handle with washers rust. Once this option is on the pan. Then, place the thumb 5 / 16 bolts into the holes with their heads inside, so they are upright and facing each other. Now the gasket on the new toilet flange with the flat side up. Seal toilets must at room temperature for the sealing is to take effect.

Now you just put the new toilet on the flange in place, then lower the bowl carefully into position. Put a little pressure for the seal, a seal, the toilet is mounted on the floor. To the bowl on the floor, it’s ok to rock back and forth and side several times side by applying pressure to the floor. This forces the excess wax on the seal. Ensure that the final position of the toilet solid doesnâ? Rock and t is perpendicular to the back wall. Make sure the dish stand out from the ground while your settings, or the seal may be broken and must be overhauled

The next part of the installation of toilets is to be essentially blocking the toilet. You need to tighten the screws with washers and nuts, but be careful not to break through the tightening of the shell. You just have to tighten the screws perfectly.

tank installation

Now you have to install the tank. All you have to press the screws on the bottom, as it has with the flange. In this case, you have to put rubber washers to ensure a secure grip. Place a sponge rubber seal on the discharge pipe, take out the tank and bowl.

Make sure the seal is properly placed and the bolts are screwed into the holes right. Screws with washers and if possible, someone hold the tank where the bolts are that you’re comfortable. Now you need to put in one of the most important parts of the installation of the toilet toilet handle. , Remember to be threaded in opposite directions. Then connect the valve and chain inside the tank.

is done, you are ready to fix the toilet lid into the bowl. It should be a line of water be prepared to go to the bottom of the tank and connect it and turn on the water. Keep an eye out for leaks and flush a few times. If your tank holds water with no problem, you are ready to make the final tightening of the bowl on the floor.

If there are still some shocks to the bathroom, you can rubber pads to stabilize it. Now take the bowl screws a tight turn by hand about memory, that it is important not to over tighten as you may break the bowl.

If you checked the bowl, cut the ends of the screws and the plastic caps on them. Put sealant around the base of the shell is also a good idea because it provides an additional waterproof protection and extra stability.

Day!

For more information on how to replace a toilet and other do it yourself advice and tips to be sure some of the other pages link to http://topcontractorsonline.com.

WC system