how to configure the fan control and limit on-air heating systems for residential systems?
Reply

by the tsunami
I suppose you mean a standard dial-up type to limit fan control. With the power in the off position, and now the dial stationary, move the dial indicator is less than about 100 degrees and the higher number of about 150 degrees. The higher figure is the temperature, the fan turns on and turns off the number, the lower the temperature. Of course, these parameters can be modified for personal well-being, but they are a good starting point. The other indicator should be permanently set at about 200 degrees is the temperature at the boundary, the oven is turned off due to more heat.

Heating and Cooling