dryer and usual PROBLEM SOLUTION: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â

1. Air bypass valves open and close valves — bypass

5 The high-temperature air conditioning compressor supply — precooler dimension to the dryer operating conditions of your install

6 Loss of coolant refrigeration mechanic name —

How dryers with air cooling

Working AIR CIRCUIT

The dryer cools the incoming compressed air for the first time in a heat exchanger air / air, where the outgoing cool dry air down before the incoming warm air condenses and some moisture.

Then, incoming air enters a heat exchanger, air cooling, where the air is cooled to 38 ° F by the liquid refrigerant.

This process causes the moisture condenses into liquid water and is evacuated.

The stars will be air in the heat exchanger air to air and is heated to the outer tube to keep sweating.

<> cooling system

The refrigeration compressor pumps hot hi-refrigerant pressure (Freon) into the condenser of the heat from the refrigerant gas in the air condenses as the gas to a liquid.

The liquid refrigerant (Freon) is then at a low pressure cold where it is measured in the heat exchanger air-cooling and heat from the hot air in the refrigerant (Freon) adsorbed.

The refrigeration compressor then sucks low pressure hot gas refrigerant (Freon) in the refrigeration compressor and the cycle begins again.

How to get water in your air?

Because of you occurs compressor inlet

Water vapor (humidity, humidity), the system by the air compressor inlet air filter.
The compressor makes about 7 cubic meter of atmospheric air at 0 psig, and the volume of air is compressed psig in 1 cubic foot of air at 100.
water vapor (humidity, humidity), which was in the 7 cubic meter of atmospheric air, is now in 1 cubic meter of air Cleaner.High

There are 3 forms of compressed air in water:

Liquid water spray (fog ) Liquid vapor (gas)

water is easily removed from the filters for general use. Remove 98% of liquid water and less than 10% of water fog and 0% vapor.Â

water spray or vapor form, requires the use of compressed air dryers. reduced

p <> For each 50 ° F and drop the temperature of the compressed air capacity of the air by 50%.
drying prevents liquid water downstream form where they may pollute or damage the system is operating problems, costly maintenance and repair.

What is “dew”?

dew – starts at a given pressure, the temperature at which water vapor condenses into liquid water

dew. Point I need

First – here is some information to help you understand the dew point :

The lowest class dew point refrigeration dryer is a class 4 Class 4 has a dew point of 38 Â ° C.
dryer must not spread among the class 4 because the water vapor will operate in the freeze dryer.

The highest dew point for a refrigeration dryer is Class 6 Class 6 has a dew point of +50 °
more F. The dew point pressure, because the practice of the highest dew point pressure causes condensation downstream piping. Â

Here’s how.

1 is exposed to determine the temperature outside of your air conditioning pipes.
Check the location of air ducts through conditioned spaces or unheated underground or between buildings.

(For example, your compressor and pipes within your institution and a minimum temperature of the air, he would never be exposed to 58A ° C)

(for example, your 58A ° F low ambient temperature = 20 º (º 38A PDP required)

determination of the pressure dew point will help you get the “Class dew point” of the dryer you need. Â

Such “classifications” are the industry standard for compressed air dryers, as determined by ISO (International Organization for Standardization)

ISO 8573.1 AIR QUALITY CLASSES dew points apply to cold air dryer.

Class 4 maximum pressure dew point 38 Â ° F
pressure class up to 5 Dew
45 A class 6 º F maximum dew point + 50 ° F

In the dew point, the dry air.

Dryer repair